Calculate a defensible budget band first, then use the report below to understand why a 1.5 kW or 10 hp servo motor price can move when scope, feedback, region, quantity, and validation responsibility change.
The first result will show a low/target/high band, confidence level, lead-time expectation, and RFQ actions. Invalid power or quantity inputs return a recoverable error instead of a broken estimate.
Primary CTA
Run the calculator, then send matched scope inputs for RFQ review.
Canonical URL
`/learn/servo-motor-price` covers servo motor price and the 1.5 kW / 10 hp aliases in one page.
Evidence boundary
Research updated 2026-07-19. Prices are public sample anchors and engineering estimates, not supplier commitments. Review cadence: Quarterly price sample refresh.
The first pass had a useful calculator and alias coverage, but several claims needed dated evidence, clearer scope boundaries, and explicit uncertainty. The table below records the content gaps fixed in this enhancement round.
| Gap found | Enhancement made | Evidence basis |
|---|---|---|
| Original price band had no dated sample basis. | Added a checked-at evidence table and separated public hardware samples from the broader pre-RFQ budget band. | ATO kit, AutomationDirect motor SKU, and SureServo2 selection PDF checked on 2026-06-09. |
| Customization premium looked over-specific for frameless motors. | Reframed frameless premium as quote-specific because no reliable public 1.5 kW frameless average was found. | Marked as RFQ variable rather than public market statistic. |
| Risk section under-covered safety, tariff, and torque-speed boundaries. | Added IEC/UL drive-system safety references, USITC landed-cost checks, and continuous/peak torque context. | IEC 61800-5-1:2022, UL 61800-5-1 Edition 2, USITC HTS update, SureServo2 torque references. |
| Lacked concrete pricing and technical bounds for the 10 hp (7.5 kW) alias. | Added a current 7.5 kW kit anchor, high-inertia component bounds, and voltage-class plus 3-phase infrastructure risk factors. | ATO 7.5 kW kit pricing and AutomationDirect SureServo2 SV2H-275B high-inertia specifications (Checked 2026-07-19). |
The useful question is not only “what is the servo motor price?” but “what exactly is included in the price line?”
Practical 1.5 kW planning band
$650-$1,900
Budget band, not a market average: public June 2026 samples show 1.5 kW hardware around $699-$875 before every cable, tax, freight, and validation item is normalized.
Motor-only vs kit spread
Scope first
A motor-only SKU, motor + drive kit, and axis package are different quote objects. The page keeps them separate so a low motor price is not mistaken for a complete installed axis.
Frameless customization premium
Quote-specific
No reliable public average was found for 1.5 kW frameless premiums. Treat rotor/stator geometry, winding, encoder, potting, and thermal fixture work as RFQ variables.
Quote confidence before drawings
Medium
Public listings can anchor a band, but final price needs torque-speed point, voltage, feedback, duty cycle, quantity, safety/compliance needs, and landed-cost basis.
Alias intent answer
1.5 kW and 10 hp (7.5 kW) servo motor price belong here
Queries for 1.5 kW and 10 hp servo motor price are narrow versions of the core servo motor price intent, so this canonical page covers them to prevent near-duplicate URLs.
Practical 10 hp (7.5 kW) planning band
$3,000-$6,500+
Higher power introduces 3-phase voltage-class matching, braking resistors, cable current, protection, and high-inertia checks. The ATO 7.5 kW kit anchor checked on 2026-07-19 is $3,060.19 before project-specific additions.
Band is intentionally wider than the public sample values because budget approval usually needs brake, cable, landed cost, validation, and support assumptions.
The model starts from public 1-2 kW servo motor samples and a dated 7.5 kW / 10 hp kit anchor, normalizes scope, then adjusts for region, feedback, kit boundary, purchase volume, and sourcing tier. The final step is always a matched supplier quote.
| Source | Checked | Public signal | Price signal | Boundary |
|---|---|---|---|---|
| ATO 1.5 kW AC servo motor kitOpen ATO 1.5 kW AC servo motor kit | Checked 2026-07-19 | 2 hp / 1.5 kW kit, 10 Nm rated torque, 1500 rpm, three-phase 220 V input, 17-bit encoder options | $699.89 public cart price; brake option shown as +$106.52 on the page | Useful economy-kit anchor. It does not prove average market price and still needs cable length, duties, tax, documentation, and application validation checked. |
| ATO 10 hp (7.5 kW) AC servo motor kitOpen ATO 10 hp (7.5 kW) AC servo motor kit | Checked 2026-07-19 | 10 hp / 7.5 kW kit, 48 Nm rated torque, 96 Nm peak torque, 1500 rpm, three-phase 380V base with 220V option | $3,060.19 public cart price; 220V option shown as +$113.08 | Provides a dated economy-kit anchor for 10 hp, but high-power systems still require voltage class, braking, cable current, cabinet protection, and validation checks. |
| AutomationDirect SureServo2 SV2M-215BOpen AutomationDirect SureServo2 SV2M-215B | Checked 2026-06-09 | 1.5 kW medium-inertia motor, 3-phase input, 24-bit encoder, integrated brake, matched to SV2A-2150 drive | $875 search-result price signal for motor SKU; drive and cables are separate comparison items | Distributor product page supports component-scope separation. It should not be compared directly with a full kit unless the drive and cables are added. |
| AutomationDirect SureServo2 drive selection PDFOpen AutomationDirect SureServo2 drive selection PDF | Checked 2026-06-09 | 1.5 kW systems list different 120 V, 230 V, and 460 V motor/drive/cable combinations with 7.16 Nm continuous torque references | Shows why the price object is a system combination, not only a kW label | Technical selection evidence, not a price index. Use it to require voltage, torque-speed, brake, and cable compatibility in RFQs. |
| AutomationDirect SureServo2 SV2H-275B (7.5 kW)Open AutomationDirect SureServo2 SV2H-275B (7.5 kW) | Checked 2026-07-19 | 7.5 kW high-inertia motor, 24-bit encoder, brake, 47.74 Nm rated torque, and 119.36 Nm max torque in the official motor overview | Motor component listed at $2,227 in the motors overview; drive and cables are separate comparison items. | Supports component-scope separation for 10 hp comparisons. Do not treat a motor-only line as a complete kit or assume a universal voltage class before the matched drive is chosen. |
| IEC 61800-5-1:2022Open IEC 61800-5-1:2022 | Checked 2026-06-09 | Adjustable speed power drive systems include power conversion, control, and motor elements; hazards include electrical, thermal, fire, mechanical, and energy risks | Compliance requirements can add documentation, qualified drive choices, and inspection cost | Standard scope supports risk framing only; the page does not claim certification pricing without supplier documentation. |
| UL 61800-5-1Open UL 61800-5-1 | Checked 2026-06-09 | UL active Edition 2 was published and ANSI approved on 2022-06-24 for adjustable speed electrical power drive systems | US-bound machine builders may need drive safety evidence before accepting the lowest servo price | Applies to safety requirements, not customs duty or a universal purchasing rule. Confirm project-specific certification requirements. |
| USITC Harmonized Tariff ScheduleOpen USITC Harmonized Tariff Schedule | Checked 2026-06-09 | USITC announced 2026 HTS Revision 10 on 2026-06-08 and maintains current tariff classification resources | Landed cost can change after quote if HTS classification, country of origin, duties, or special measures are not separated | Tariff treatment is case-specific. The page flags the risk but does not assign a duty rate without a classified import record. |
Send the power class, voltage, torque-speed point, feedback, quantity, and scope boundary so the public sample band becomes a supplier-ready RFQ comparison.
These are the concrete additions from the research round. Where public evidence is weak, the page keeps the conclusion as a boundary condition instead of forcing a false average.
SureServo2 selection data lists 1.5 kW examples with 7.16 Nm continuous torque and higher intermittent torque, with voltage-dependent speed regions.
AutomationDirect SureServo2 drive selection PDF, checked 2026-06-09
Decision use: Ask for continuous torque, peak torque, rated speed, bus voltage, and cooling assumptions before treating two 1.5 kW prices as equivalent.
ATO lists a 1.5 kW / 10 Nm / 1500 rpm AC servo kit at $699.89, with brake shown as an added option.
ATO product page, checked 2026-07-19
Decision use: Use it as an economy-kit anchor, then add brake, cable, freight, tax, import treatment, and validation rows.
AutomationDirect identifies SV2M-215B as a 1.5 kW motor with 24-bit encoder and brake for use with a separate 1.5 kW drive.
AutomationDirect product page, checked 2026-06-09
Decision use: Do not compare one motor SKU with a motor-drive-cable bundle without adding missing line items.
ATO lists a 7.5 kW / 10 hp kit at 48 Nm rated and 96 Nm peak with 380V base and 220V option; AutomationDirect lists the SV2H-275B at 47.74 Nm rated and 119.36 Nm max torque.
AutomationDirect and ATO product catalogs, checked 2026-07-19
Decision use: Do not budget a 10 hp servo without confirming voltage class, 3-phase supply, braking energy, cable current, protection, and matched drive scope.
IEC 61800-5-1:2022 covers PDS elements and hazards including electrical, thermal, fire, mechanical, and energy risks; UL 61800-5-1 Edition 2 was published 2022-06-24.
IEC and UL standards pages, checked 2026-06-09
Decision use: For US/EU machine builds, request drive certificates, installation manual constraints, SCCR/protection data when applicable, and accepted replacement evidence.
| Scope | Included | Price effect | RFQ check |
|---|---|---|---|
| Motor only | Servo motor body, feedback if integrated, no drive/cables | Looks cheaper in search results because the control electronics and harness are outside the line item. | Ask whether brake, oil seal, connector, and encoder resolution are included. |
| Servo kit | Motor, drive, basic cable set, and matching rated current | Better comparison unit for a buyer searching servo motor price or 1.5 kW servo motor price. | Match bus voltage, command interface, cable length, and brake option. |
| Motion axis package | Motor/drive plus gearbox, mounting, tuning, validation, and acceptance criteria | Integration and test work can exceed the delta between economy and premium motor hardware. | Separate hardware, NRE, validation, and production pricing in the quote table. |
| Frameless servo motor kit | Rotor/stator set, winding customization, feedback choice, thermal and assembly assumptions | Mechanical responsibility moves from supplier housing to your axis design, so engineering validation matters. | Include shaft diameter, air gap, cooling path, duty cycle, and sensor package in the first RFQ. |
A public 1.5 kW or 10 hp servo motor price is useful only when the buyer knows which cost layer it represents. This table shows when the same number is a screen, a quote, a landed cost, or a production decision.
| Price basis | Use when | Still excluded | Buyer action |
|---|---|---|---|
| Public cart price | Fast screening of a known catalog kit or SKU | Freight, duties, local tax, cable length, brake, support, compliance pack | Capture SKU, date, voltage, torque, encoder, and option state as a snapshot. |
| EXW / FOB supplier quote | Comparing factory-side hardware from multiple suppliers | Import clearance, domestic freight, distributor service, replacement stock | Keep Incoterms and country of origin in the quote table, not only in email text. |
| Landed cost | Budget approval and supplier award | Usually excludes internal integration time unless explicitly added | Ask purchasing to separate HTS/classification assumptions, duty, tax, freight, and broker fees. |
| Validated axis cost | Production machine or custom frameless motor decision | None; this is the intended full decision basis | Add drive tuning, thermal test, fixture, acceptance test, spare policy, and NRE amortization. |
| Option | Best fit | Price effect | Risk |
|---|---|---|---|
| Economy housed AC servo kit | Cost-sensitive automation, light support needs | Lowest hardware band | Documentation, tuning support, and long-term availability may be weaker. |
| Industrial catalog servo system | Repeatable factory builds and distributor support | Mid to high band | Option creep can hide in cables, brake, drive interface, and software licenses. |
| Premium servo brand | Global installed base, strict uptime, safety or support expectations | High band | May be over-specified when the axis only needs moderate dynamics. |
| Custom frameless servo | Robot joints, compact medical axes, direct-drive integrations | Variable; often higher before scale | Thermal path, assembly tolerances, and validation ownership must be explicit. |
| Stepper or hybrid servo alternative | Lower power, lower speed, simpler positioning systems | Can be lower | May miss high-speed torque, thermal, or smoothness requirements. |
Use the tool for budget screening and quote preparation. Move to supplier RFQ when the decision affects production BOM, safety compliance, or a custom frameless motor drawing.
| Risk | Trigger | Impact | Mitigation |
|---|---|---|---|
| Scope mismatch | Comparing motor-only price with complete servo kit price | False savings and late budget overruns | Normalize every quote into motor, drive, cable, brake, gearbox, NRE, freight, and validation rows. |
| Power-rating shortcut | Using 1.5 kW alone without torque-speed and duty-cycle data | Wrong frame size, overheating, or undersized drive current | Quote by continuous torque, peak torque, speed, voltage, duty cycle, and thermal mounting condition. |
| Landing-cost blind spot | Budgeting from EXW/FOB or cart prices only | Customs, freight, tax, and distributor margin arrive after approval | Request EXW/FOB and landed cost separately before purchase approval. |
| Frameless integration under-scoped | Treating frameless servo like a housed catalog motor | Assembly fixture, encoder, cooling, and QA cost are missed | Add mechanical interface, air-gap inspection, thermal path, and feedback alignment to the RFQ. |
| Public sample overread | Using one public listing as market average | Negotiation anchor is too narrow or outdated | Use three matched quotes and refresh price samples quarterly for high-volume programs. |
| Compliance evidence missing | Choosing the lowest motor/drive price before checking IEC, UL, machine safety, or customer documentation needs | A cheap servo can be rejected by the machine builder, inspector, or end customer after purchase. | Ask for drive safety files, installation limits, protection requirements, and approved substitution evidence during RFQ. |
| Tariff and landed-cost ambiguity | Approving a budget from public cart or EXW/FOB price without classification assumptions | Import duty, origin treatment, broker fees, and domestic freight can move the approved cost. | Separate hardware price from HTS/classification assumption, country of origin, freight, tax, and broker fees. |
Send your torque-speed point, voltage, quantity, feedback interface, package envelope, and validation target. We can turn the estimator output into a matched servo or frameless motor quote package.
Email RFQ
Use email for formal RFQ details, drawings, and specification files.
+86 18857971991
Use WhatsApp for quick pre-RFQ clarification and response.
